Ton vs. Yard: How Bulk Aggregate Pricing and Measurement Works

aggregate pricing tons vs yards Kohner Materials

Ton vs. Yard: How Bulk Aggregate Pricing and Measurement Works

Short answer: aggregate is sold by weight, concrete by volume. Gravel, sand and crushed stone are priced by the ton because every load is weighed on a certified truck scale. Ready mix concrete is priced by the cubic yard because it’s batched to fill a space of known size. To convert aggregate between the two, multiply cubic yards by the material’s weight per yard. Most aggregates weigh about 1.3 to 1.5 tons per cubic yard, so 1.4 is a common rule of thumb.

That’s the whole idea. The rest of this guide shows why the industry measures each material the way it does, how to do the conversion, and where the mix-up between tons and yards costs people money. If you already know your measurements and just need a quantity, our guide on how much crushed stone you need walks through the volume math step by step.

Need help estimating cost for your project? Call (507) 454-5093 or contact Kohner Materials for a free quote.

Why Aggregate Is Sold by the Ton

If you’ve ordered gravel, sand or limestone, your quote was almost certainly written in tons. There are three practical reasons.

Weight is easy to measure accurately. Every load leaving a pit or quarry crosses a certified truck scale. The truck is weighed empty and full, and the difference is exactly what you’re buying. Measuring the volume of a loose pile in a truck bed is far less precise.

Volume changes; weight doesn’t. Loose aggregate settles during hauling and compacts once it’s spread and rolled. A cubic yard measured at the pit isn’t the same cubic yard after it’s been dumped and packed down. A ton is still a ton.

Trucks are limited by weight. Haul trucks are rated by legal weight limits, not by how much their beds can hold. Pricing by the ton lines up with how loads are actually planned and delivered.

This applies across our aggregate supply products, including construction and concrete sand, limestone, river rock and recycled concrete aggregate.

Why Concrete Is Sold by the Cubic Yard

Ready mix concrete works the other way around. It’s priced by volume because of how it’s made and used.

It’s batched to fill a space. A slab, footing or wall has fixed dimensions. Concrete is mixed to fill that exact volume, so ordering by the yard matches the form you’re pouring into.

It’s a designed mix, not a raw material. Each load is batched to a specific recipe of cement, sand, stone and water for a target strength. Our ready mix concrete strength guide explains how mix designs differ.

It doesn’t settle like loose stone. Once placed, a cubic yard of concrete stays roughly a cubic yard, so volume is a reliable unit.

To work out how many yards you need, use our guide on how to calculate concrete volume or the Kohner Materials calculator.

Ton to Cubic Yard Aggregate Conversion

To convert between tons and cubic yards, you need one number: the material’s weight per cubic yard. Then the math is simple.

Tons = Cubic yards × Tons per cubic yard

Cubic yards = Tons ÷ Tons per cubic yard

Here are typical ranges for common materials:

Material Typical weight (tons per cubic yard)
Sand (dry) 1.3–1.4
Gravel / pea gravel 1.35–1.5
Crushed limestone 1.4–1.5
Class 5 / road base 1.4–1.6
River rock 1.3–1.5
Recycled concrete aggregate 1.2–1.4
Ready mix concrete (for comparison) about 2.0

Weights vary with rock type, size and moisture, so ask your supplier for the figure for the exact product you’re ordering. Not sure which material fits your project? Our guide to aggregate materials compares sand, gravel, limestone and crushed stone, and what gravel is used for covers driveways, drainage, backfill and landscaping.

Example: Converting a Gravel Driveway From Yards to Tons

Say you’re resurfacing a gravel driveway that’s 12 feet wide and 50 feet long, and you want 4 inches of crushed limestone.

Find the volume in cubic feet. 12 ft × 50 ft × 0.33 ft (4 inches) = 200 cubic feet.

Convert to cubic yards. 200 ÷ 27 = about 7.4 cubic yards.

Convert to tons. 7.4 × 1.4 = about 10.4 tons.

Add for compaction. Crushed stone packs down when it’s rolled, so add 10 to 15 percent. Order about 11.5 to 12 tons.

Your quote will show that tonnage, priced per ton, plus any delivery charge. For help choosing the right base material, see the best aggregate base options for driveways and roads.

Bulk Aggregate Pricing Explained: Why Units Matter for Your Budget

Mixing up tons and yards is one of the most common reasons projects run short or over budget. Here’s what to watch for:

  • Ordering yards when the quote is in tons. If you calculate 7 cubic yards and order 7 tons, you’ll get about half the material you need.
  • Ignoring moisture. Wet sand and gravel weigh more than dry. Because you pay by weight, a rain-soaked stockpile can mean slightly less material per ton.
  • Forgetting compaction. Loose stone shrinks when it’s packed. Order a little extra so your finished base reaches the right depth.
  • Comparing quotes in different units. One supplier quoting per ton and another per yard aren’t directly comparable until you convert them using the same weight per yard.
  • Leaving out delivery. Trucking is often priced separately, by the load, distance or hour. Check our concrete and aggregate service areas across Southeast Minnesota and Western Wisconsin.

Concrete has its own cost factors, such as mix strength, additives and short-load fees. Our post on Wisconsin concrete costs covers those in detail.

What to Ask When Comparing Aggregate Quotes

Before you sign off on an order, get clear answers to five questions:

  • Is this price per ton, per cubic yard or per load?
  • What weight per cubic yard do you use for this product?
  • Is delivery included, and is there a minimum load?
  • Is the material washed, screened or crushed, and to what size?
  • How much extra should I order for compaction?

A local supplier who knows the material can answer all five in one call. That saves you from ordering twice or paying for a second delivery.

How Kohner Materials Helps You Estimate

We do the conversion with you. Tell us the size of the area and the depth you need, and we’ll help you work out the tons or yards to order.

We match the material to the job. Driveway base, drainage stone, concrete sand and ready mix all come from the same team, so you’re not piecing together advice from three suppliers.

We deliver across the region. Kohner Materials has supplied Southeast Minnesota and Western Wisconsin since 1959, with 11 locations and ready mix concrete delivery to your job site.

Need help estimating cost for your project? Call (507) 454-5093 or contact Kohner Materials for a free quote.